loaded at:     00480410 00491224
relocated to:  00800000 00810E14
board data at: 0010B160 00111B6C
relocated to:  0080712C 0080DB38
zimage at:     00487410 005A0690
relocated to:  00811000 0092A280
avail ram:     00400000 00800000

Linux/PPC load: console=ttyS0,9600 console=tty0 ether=11,0x300,0xe4000,0xe8000,eth0 floppy=0,4,cmos cs4232=0x830,10,6,7,0x330,9 ramdisk_size=4096 root=/dev/sda3
Uncompressing Linux..................................................done.
Now booting the kernel
Memory BAT mapping: BAT2=8Mb, BAT3=8Mb, residual: 0Mb
Total memory = 16MB; using 64kB for hash table (at c02f0000)
Linux version 2.4.18 (root@Juneau-lug) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Fri May 2 08:22:58 AKDT 2003
PReP architecture
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 console=tty0 ether=11,0x300,0xe4000,0xe8000,eth0 floppy=0,4,cmos cs4232=0x830,10,6,7,0x330,9 ramdisk_size=4096 root=/dev/sda3
floppy0: setting CMOS code to 4
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 13060k available (1904k kernel code, 784k data, 268k init, 0k highmem)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
NCR 53c810 rev 1 detected, setting PCI class.
Fixup res 1 (200) of dev 00:0c.0: 40010000 -> 10000
IBM ID: 000000fc
Setting PCI interrupts for a "IBM 6015/7020 (Sandalfoot/Sandalbow)"
Relocating PCI address 20000000 -> 1000000
PCI: Cannot allocate resource region 0 of PCI bridge 0
PCI: resource is 0..fffffff (100), parent c0227d74
PCI:00:0c.0: Resource 0: 01000000-010000ff (f=101)
PCI:00:0c.0: Resource 1: 00010000-000100ff (f=200)
PCI: Cannot allocate resource region 1 of device 00:0c.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
NTFS driver v1.1.22 [Flags: R/W]
udf: registering filesystem
IBM_S15: initializing
IBM_S15: could not find an IBM S15 in the system
initialize_kbd: Keyboard reset failed, no ACK
Detected PS/2 Mouse Port.
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
eth0: WD80x3 at 0x300, 10 00 5A 2D 6A 2A WD8013, IRQ 11, shared memory at 0xe4000-0xe7fff.
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
PCI: Enabling device 00:0c.0 (0005 -> 0007)
sym.0.12.0: setting PCI_COMMAND_PARITY...
sym0: <810> rev 0x1 on pci bus 0 device 12 function 0 irq 13
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
  Vendor: IBM       Model: CDRM00201     !F  Rev: 0724
  Type:   CD-ROM                             ANSI SCSI revision: 02
sym0:6: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8)
  Vendor: IBM       Model: 0662S12       !O  Rev: 2 23
  Type:   Direct-Access                      ANSI SCSI revision: 02
sym0:6:0: tagged command queuing enabled, command queue depth 16.
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sda: 2055035 512-byte hdwr sectors (1052 MB)
Partition check:
 /dev/scsi/host0/bus0/target6/lun0: p1 p2 p3
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sym0:3: FAST-5 SCSI 4.2 MB/s ST (236.0 ns, offset 8)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
rtc: unable to get misc minor
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 268k init 24k pmac 8k chrp 4k openfirmware
INIT: version 2.84 booting
Loading /etc/console/boottime.kmap.gz
Activating swap.
Adding Swap: 131840k swap-space (priority -1)
Checking root file system...
fsck 1.27 (8-Mar-2002)
/dev/sda3: clean, 16997/110880 files, 87391/221430 blocks
System time was Sat May 17 14:36:32 UTC 2003.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Sat May 17 14:36:37 UTC 2003.
Checking all file systems...
fsck 1.27 (8-Mar-2002)
Setting kernel variables.
Loading the saved-state of the serial devices... 
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Mounting local filesystems...
nothing was mounted
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
Configuring network interfaces: done.
Starting portmap daemon: portmap.
Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting internet superserver: inetd.
Exporting directories for NFS kernel daemon...done.
Starting NFS kernel daemon: nfsd mountd.
Starting OpenBSD Secure Shell server: sshd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.


            Zarquon (IBM RS/6000 7020 [40P] Linux Debian 3.0)

zarquon login: root
Password: 
Last login: Sat May 17 16:31:53 2003 on ttyS0
Welcome to Zarquon (IBM RS/6000 7020 [40P] Linux Debian 3.0)!
zarquon:~# halt

Broadcast message from root (ttyS0) (Sat May 17 16:39:22 2003):

The system is going down for system halt NOW!
INIT: zarquon:~# INIT: Sending processes the TERM signal

Stopping periodic command scheduler: cron.
Stopping internet superserver: inetd.
Stopping OpenBSD Secure Shell server: sshd.
Stopping NFS kernel daemon: mountd nfsdnfsd: last server has exited
nfsd: unexporting all filesystems
rpciod: active tasks at shutdown?!
.
Unexporting directories for NFS kernel daemon...done.
Stopping deferred execution scheduler: atd.
Stopping kernel log daemon: klogd.
Stopping system log daemon: syslogd.
Stopping portmap daemon: portmap.
Sending all processes the TERM signal... done.
Sending all processes the KILL signal... done.
Saving random seed... done.
Unmounting remote filesystems... done.
Deconfiguring network interfaces: done.
Deactivating swap... done.
Unmounting local filesystems... done.
Power down.